Leading Factory: XPON 4GE AC WiFi CATV USB ONU Provider

●4G+WIFI+CATV+USB is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.

●4G+WIFI+CATV+USB are based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.

●4G+WIFI+CATV+USB adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China transfer data EPON CTC3.0.

●4G+WIFI+CATV+USB are compliant with IEEE802.11n STD, adopts with 4x4 MIMO, the highest rate up to 1200Mbps.

● 4G+WIFI+CATV+USB are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.

● 4G+WIFI+CATV+USB are designed by ZTE chipset 279128S.

> Supports Dual Mode (can access GPON/EPON OLT).

> Supports GPON G.984/G.988 standards and IEEE802.3ah. > Support CATV interface for Video Service and remote control by Major OLT > Support 802.11 b/g/n, 802.11ac WIFI(4x4 MIMO) function and Multiple SSID > Support NAT, Firewall function. > Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect > Support port mode of VLAN configuration

Technical Item	Details
PON interface	1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface	4 x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector
USB Interface	Standard USB2.0
WIFI Interface	Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 4*4MIMO, 5dBi external antenna, rate up to 867Mbps Support: multiple SSID TX power: 11n--22dBm/11ac--24dBm
CATV Interface	RF, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 80dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm)
LED	11 LED, PWR, LOS,PON, LAN1~LAN4, 5G,2.4G, normal (CATV)
Push-Button	4, for Function of Power on/off, Reset, WPS, WIFI
Operating condition	Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing）
Storing Condition	Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/1A
Power Consumption	<6W
Net Weight	<0.4kg

> Support LAN IP and DHCP Server configuration

> Support TR069 Remote Configuration and WEB Management > Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode > Support IPv4/IPv6 dual stack > Support IGMP transparent/snooping/proxy > In compliant with IEEE802.3ah standard > Compatible with popular OLT(HW, ZTE, FiberHome...)

Product Name	Product Model	Descriptions
XPON 4GE AC WIFI CATV USB ONU	CX51041Z28S	4 * 10 / 100 / 1000M RJ45 interface, support CATV AGC, USB interface ,1 PON interface, RJ 11 interface, support WIFI 5G&2.4G, plastic case, external power adapter

● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Service：Broadband Internet access, IPTV, VOD, video surveillance, CATV etc.

Pilot Lamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN4	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
Normal (CATV)	On	Input optical power is between -15dBm and 2dBm
Normal (CATV)	Off	Input optical power is higher than 2dBm or lower than -15dBm

ONU Model

CX51141Z28S

CX51041Z28S

CX50141Z28S

CX50041Z28S

Feature

CATV

VOIP

2.4/5GWIFI

USB

CATV

2.4/5GWIFI

USB

VOIP

2.4/5GWIFI

USB

2.4/5GWIFI

USB

Q1. What are the main features of XPON ONU? - XPON ONU is equipped with 4 Gigabit ports. - Support dual-band WiFi2.4/5.8GHz. - Support EPON and GPON access. - ONU can automatically identify the central office OLT mode (EPON or GPON). - Adaptive EPON or GPON access capability. Q2. Which standards and technical specifications does the XPON ONU comply with? - The equipment functions and performance indicators comply with the relevant recommendations of ITU-T and IEEE. - Comply with relevant international standards and industry technical specifications. - Compatible with mainstream OLT (local terminal) and other functions. Q3. What is the purpose of the web management function of XPON ONU? - Web management function allows users to configure and monitor XPON ONU through a web-based interface. - It provides a user-friendly interface to manage ONU settings and performance. Q4. Can XPON ONU be used with other types of OLT? - Yes, XPON ONU is compatible with mainstream OLT and other functions. - It can be used with various OLTs, as long as it meets the relevant standards and technical specifications. Q5. Can XPON ONU support multiple devices and users? - Yes, the 4 Gigabit ports of XPON ONU allow multiple devices to be connected. - It can support multiple users at the same time, providing high-speed Internet access and connectivity.