● 2.5GE+1GE is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.
● 2.5GE+1GE is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● 2.5GE+1GE adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. ● 2.5GE+1GE is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. ● 2.5GE+1GE is designed by Realtek chipset 9601D.> Supports Dual Mode (can access GPON/EPON OLT).
> Supports SFU and HGU of EPON CTC 3.0 standard.
> Supports GPON G.984/G.988 standards and IEEE802.3ah.
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support port mode of vlan configuration.
Technical Item | Details |
Pon interface | 1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Overload optical power: -3dBm(EPON) or - 8dBm(GPON) Transmission distance: 20KM |
LAN interface | 1x10/100/1000M/2500Mbps auto adaptive Ethernet interfaces Full/Half, 1x10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
LED | 6 LED, For Status of POWER, LOS, PON, LAN1, LAN2 |
Push-Button | 2, for Function of Power on/off, Reset |
Operating condition | Temperature : 0℃~50℃ Humidity :10%~90%(non-condensing) |
Storing Condition | Temperature : -40℃~+60℃ Humidity :10%~90%(non-condensing) |
Power supply | DC 12V/1A |
Power Consumption | <3W |
Net Weight | <0.2kg |
> Support TR069 Remote Configuration and maintenance
> Support Route PPPoE/DHCP/Static IP and Bridge mixed mode
> Support IPv4/IPv6 dual stack
> Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy
> Compatible with popular OLT(HW, ZTE, FiberHome,VSOL...)
Pilot | Status | Description |
POWER | On | The device is powered up. |
Off | The device is powered down. | |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LAN | On | Port is connected properly (LINK). |
Blink | Port is sending or/and receiving data (ACT). | |
Off | Port connection exception or not connected. |
ONU Model | CX01020R01D | CX00020R01D |
|
|
Feature | 2.5GE+1GE CATV | 2.5GE+1GE
|
|