Top XPON 1G3F WIFI CATV ONU Suppliers | Factory Direct Manufacturing

● 1G3F+WIFI+CATV is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.

● 1G3F+WIFI+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● 1G3F+WIFI+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunications EPON CTC3.0 . ● 1G3F+WIFI+CATV is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps. ● 1G3F+WIFI+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. ● 1G3F+WIFI+CATV is designed by ZTE chip set 279127.

> Supports Dual Mode (can access GPON/EPON OLT).

> Supports GPON G.984/G.988 standards > Support CATV interface for Video Service and remote control by Major OLT > Support 802.11n WIFI (2x2 MIMO) function > Support NAT, Firewall function. > Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect > Support port mode of VLAN configuration

Technical Item	Details
PON interface	1 E/GPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0.5~+4dBm Transmission distance: 20KM
LAN interface	1x10/100/1000Mbps and 3x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
WIFI Interface	Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM
CATV Interface	RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 80dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm)
LED	10 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN4、 NORMAL(CATV)
Push-Button	3, for Function of Power on/off, Reset, WPS
Operating condition	Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing）
Storing Condition	Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/1A
Power Consumption	<6W
Net Weight	<0.4kg

> Support LAN IP and DHCP Server configuration > Support TR069 Remote Configuration and maintenance > Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode > Support IPv4/IPv6 dual stack > Support IGMP transparent/snooping/proxy > In compliant with IEEE802.3ah standard > Compatible with popular OLT (HW, ZTE, FiberHome...)

Product Name	Product Model	Descriptions
XPON 1G3F WIFI CATV ONU	ZX21040Z127	110/100/1000M and 310/100M Ethernet interface, 1 PON interface, built-in FWDM, 1 RF interface, support Wi-Fi function, support AGC, plastic casing, external power supply adapter

● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)

● Typical Service：Broadband Internet access, IPTV, CATV etc.

PilotLamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN4	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
Normal (CATV)	On	Input optical power is between -18dBm and 2dBm
Normal (CATV)	Off	Input optical power is higher than 2dBm or lower than -18dBm

Q1. How many ports does XPON ONU have? A: XPON ONU has 1 Gigabit port and 3 100M ports. Q2. What standards does XPON ONU meet? A: XPON ONU complies with IEEE802.11b/g/n standard. Q3. What is the WiFi frequency range of XPON ONU? A: The WiFi frequency of XPON ONU is 2.4-2.4835GHz. Q4. What technology does the WiFi of XPON ONU use? A: The WiFi of XPON ONU adopts MIMO (Multiple Input Multiple Output) technology. Q5. Does XPON ONU support XGSPON environment? A: Yes, XPON ONU supports XGSPON environment. Q6. What is the optical receiving wavelength of XPON ONU? A: The light receiving wavelength of XPON ONU is 1550nm. Q7. What is the warranty period of the products sold by your company? A: The products sold by our company are guaranteed for 1-3 years. Q8. Can the software of XPON ONU be upgraded for free? A: Yes, the software of XPON ONU can be upgraded for free for life.