XPON 1G1F+CATV +WIFI Chinese Suppliers

Discover high-quality XPON 1G1F+CATV+WIFI products from reliable Chinese suppliers. As a factory, we guarantee exceptional performance and competitive pricing.

Request a Quote
  • XPON 1G1F+CATV +WIFI Chinese Suppliers
  • XPON 1G1F+CATV +WIFI Chinese Suppliers
  • XPON 1G1F+CATV +WIFI Chinese Suppliers
  • XPON 1G1F+CATV +WIFI Chinese Suppliers
  • XPON 1G1F+CATV +WIFI Chinese Suppliers

PRODUCTS DETAILS

●1G1F+WIFI+CATV is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.

● 1G1F+WIFI+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● 1G1F+WIFI+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunications EPON CTC3.0. ● 1G1F+WIFI+CATV is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps. ● 1G1F+WIFI+CATV is full compliant with technical  regulations such as ITU-T G.984.x and IEEE802.3ah. ● 1G1F+WIFI+CATV is designed by Realtek chipset 9602C.

> Supports Dual Mode (can access GPON/EPON OLT).

> Supports GPON G.984/G.988 standards > Support CATV interface for Video Service and remote control by Major OLT > Support 802.11n WIFI (2x2 MIMO) function > Support NAT, Firewall function. > Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect > Support port mode of VLAN configuration

Technical Item

Details

PON interface

1 G/EPON port(EPON PX20+ and GPON Class B+)

Upstream: 1310nm; Downstream: 1490nm

SC/APC connector

Receiving sensitivity: ≤-28dBm

Transmitting optical power: 0~+5dBm

Transmission distance: 20KM

LAN interface

1x10/100/1000Mbps and 1x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector

WIFI Interface

Compliant with IEEE802.11b/g/n

Operating frequency: 2.400-2.4835GHz

support MIMO, rate up to 300Mbps

2T2R,2 external antenna 5dBi

Support: Multiple SSID

Channel:13

Modulation type: DSSSCCK and OFDM

Encoding scheme: BPSKQPSK16QAM and 64QAM

CATV Interface

RF, optical power : +2~-15dBm

Optical reflection loss: 45dB

Optical receiving wavelength: 1550±10nm

RF frequency range: 47~1000MHz,  RF output impedance: 75Ω

RF output level: 80dBuV-7dBm optical input

AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm

MER: 32dB(-14dBm optical input), 35(-10dBm)

LED

9 LED, For Status of WIFIWPSPWRLOSPONLAN1~LAN2WORNNORMAL(CATV)

Push-Button

4, for Function of Power on/off, Reset, WPS, WIFI

Operating condition

Temperature : 0+50

Humidity :10%90%non-condensing

Storing Condition

Temperature : -40℃+60

Humidity :10%90%non-condensing

Power supply

DC 12V/1A

Power Consumption

<6W

Net Weight

<0.4kg

> Support LAN IP and DHCP Server configuration > Support TR069 Remote Configuration and maintenance > Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode > Support IPv4/IPv6 dual stack > Support IGMP transparent/snooping/proxy > In compliant with IEEE802.3ah standard > Compatible with popular OLT (HW, ZTE, FiberHome,VSOL...)

Product Name

Product Model

Descriptions

XPON 1G1F+WIFI+CATV ONU

 

CX21020R02C

1*10/100/1000M and 1*10/100M Ethernet interface, 1 PON interface, built-in FWDM, 1 RF interface, support Wi-Fi function, support AGC, plastic casing, external power supply adapter

● Typical Solution:FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Service:Broadband Internet access, IPTV, VOD(video on demand), video surveillance,  etc.

PilotLamp

Status

Description

WIFI

On

The WIFI interface is up.

Blink

The WIFI interface is sending or/and receiving data (ACT).

Off

The WIFI interface is down.

WPS

Blink

The WIFI interface is securely establishing a connection.

Off

The WIFI interface does not establish a secure connection.

PWR

On

The device is powered up.

Off

The device is powered down.

LOS

Blink

The device doses not receive optical signals or with low signals.

Off

The device has received optical signal.

PON

On

The device has registered to the PON system.

Blink

The device is registering the PON system.

Off

The device registration is incorrect.

LAN1~LAN2

On

Port (LANx) is connected properly (LINK).

Blink

Port (LANx) is sending or/and receiving data (ACT).

Off

Port (LANx) connection exception or not connected.

WARN

(CATV)

On

Input optical power is higher than 2dBm or lower than -15dBm

Off

Input optical power is between -15dBm and 2dBm

Normal

(CATV)

On

Input optical power is between -15dBm and 2dBm

Off

Input optical power is higher than 2dBm or lower than -15dB

"Device Menu" displays the basic information of the current device, such as device name, GPON SN hardware and software version, IP address of LAN, MAC address and connection status of WAN.

NOTE: Some device information may vary by manufacturer.

Q1. What is the specification of XPON ONU? A: XPON ONU has one 10M/100M/1000M and one 10M/100M port, and one WIFI CATV port. Support adaptive GPON and EPON mode, WIFI complies with IEEE802.11n standard, the maximum rate is 300Mbps. It also has AGC automatic gain function of CATV, and remote management function. Q2. How does XPON ONU comply with technical specifications? A: XPON ONU fully complies with technical specifications such as ITU-T G.984.x. It ensures compatibility and interoperability with other network devices that follow the same standards. Q3. Can the ONU terminal perform remote fault diagnosis and positioning? A: Yes, the ONU terminal can be used together with the OLT local terminal to realize remote fault diagnosis and location. This allows efficient troubleshooting and problem solving without physical intervention. Q4. What commands can be issued using TR069 OMCI? A: XPON ONU supports TR069 OMCI command, which can be used for configuration management, software upgrade, performance monitoring and other purposes. These commands provide a standardized method for remote management and control of ONUs. Q5. Which OLT brands are compatible with XPON ONU? A: XPON ONU is compatible with SMART OLT, UP2000, Huawei, ZTE, Fiberhome, CDATA, VSOL, HSGQ, BDCOM and other OLT brands. This ensures flexibility and interoperability with different network infrastructures

Hot Products

24 Gigabit POE+2 gigabit SFP port switch

24 Gigabit POE+2 gigabit SFP port switch

XPON 1G3F WIFI CATV ONU Suppliers Manufacturing

XPON 1G3F WIFI CATV ONU Suppliers Manufacturing

XPON 1G3F WIFI CATV USB ONU Manufacturers and Suppliers

XPON 1G3F WIFI CATV USB ONU Manufacturers and Suppliers

XPON 1G3F WIFI POTs USB ONU Manufacturing Factory

XPON 1G3F WIFI POTs USB ONU Manufacturing Factory

XPON 4GE AC WIFI CATV POT USB ONU

XPON 4GE AC WIFI CATV POT USB ONU

CT-1001C( 47~ 1050MHz) FTTH CATV O/E   Converter Customized Manufacturing

CT-1001C( 47~ 1050MHz) FTTH CATV O/E Converter Customized Manufacturing

WIFI6 AX3000  4GE WIFI CATV POTs 2USB ONU Supplier

WIFI6 AX3000 4GE WIFI CATV POTs 2USB ONU Supplier

XPON ONU 1GE CATV Production Plant

XPON ONU 1GE CATV Production Plant

XPON 2GE AC WIFI CATV POTS ONU

XPON 2GE AC WIFI CATV POTS ONU

XPON 4GE AC WIFI USB ONU Manufacturing Company

XPON 4GE AC WIFI USB ONU Manufacturing Company

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours