● 4GE+AC WIFI+CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access.
● 4GE+AC WIFI+CATV is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
● 4GE+AC WIFI+CATV adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China telecommunication CTC3.0 and GPON Standard of ITU-TG.984.X
● 4GE+AC WIFI+CATV is designed by Realtek chipset 9607C.
> Supports GPON and EPON auto detection
> Support Rogue ONT detection > Support Route mode PPPOE/DHCP/Static IP and Bridge mixed mode > Support NAT, Firewall function. > Support Internet, IPTV and CATV services automatically bound to ONT ports > Support Virtual server, DMZ, and DDNS, UPNP > Support Filtering based on MAC/IP/URL
| Technical Item | Details |
| PON interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface | 4 x 10/100/1000Mbps auto adaptive Ethernet interfaces, Full/Half, RJ45 connector |
| WIFI Interface | Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 4*4MIMO, 5dBi external antenna, rate up to 867Mbps Support: multiple SSID TX power: 11n--22dBm/11ac--24dBm |
| CATV Interface | RF, optical power : +2~-18dBm Optical reflection loss: ≥60dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED | 10 LED, For Status of PWR、LOS、PON、LAN1、LAN2、LAN3、LAN4、2.4G、5.8G、 Normal(CATV) |
| Push-Button | 3 button for Function of Power on/off, Reset, WPS |
| Operating condition | Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition | Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply | DC 12V/1A |
| Power Consumption | <6W |
| Net Weight | <0.3kg |
> Support 802.11 b/g/n, 802.11ac WIFI(4x4 MIMO) function and Multiple SSID > Support Flow & Storm Control , Loop Detection and Port Forwarding > Support IPv4/IPv6 dual stack and DS-Lite > Support IGMP transparent/snooping/proxy > Support TR069 Remote Configuration and maintenance > Support CATV remote management from OLT > Integrated OAM remote configuration and maintenance function > Compatible with popular OLT (HW, ZTE, FiberHome,VSOL...)Gigabit ports, dual-band Wi-Fi, OAM remote configuration FAQs Q1. What are the main features of the device? A: The device offers four Gigabit ports, supports dual-band Wi-Fi operating at 2.4GHz and 5.8GHz, and complies with 802.11b/g/n and 802.11ac specifications. It also supports SSIB technology, storm control, and integrates OAM remote configuration and maintenance functions. Q2. How does SSIB technology work and what are its benefits? SSIB technology can divide a wireless LAN into multiple subnets, each with different authentication settings. This can enhance security and resiliency in wireless network environments. Q3. What is storm control or traffic suppression and why is it important? Storm control or traffic suppression features on the device can block traffic of unknown multicast and unknown unicast packets. This helps prevent network congestion and improves overall network performance by minimizing unnecessary or unwanted network traffic. Q4. What are the advantages of integrating OAM remote configuration and maintenance functions? The device integrates OAM (Operation, Administration and Maintenance) remote configuration and maintenance functions, which simplifies the management and troubleshooting process. It enables network administrators to configure and maintain devices remotely, reducing the need for physical access to devices. Q5. Can the device adjust the gain strength for different input optical powers? Yes, this unit is equipped with Automatic Gain Control (AGC) technology and is designed for CATV applications. It can automatically adjust the gain strength of different input optical power, optimize the signal quality, and ensure the reliable and stable transmission of CATV network.● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Service：Broadband Internet access, IPV, CATV etc.| Pilot Lamp | Status | Description |
| 2.4G | On | 2.4G WIFI up |
| Blink | 2.4G WIFI is sending or/and receiving data (ACT). | |
| Off | 2.4G WIFI down | |
| 5.8G | On | 5G WIFI up |
| Blink | 5G WIFI is sending or/and receiving data (ACT). | |
| Off | 5G WIFI down | |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN1~LAN4 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
| Normal (CATV) | On | Input optical power is between -18dBm and 2dBm |
| Off | Input optical power is higher than 2dBm or lower than -18dBm |
| Product Name | Product Model | Descriptions |
| XPON 4GE AC WIFI CATV ONU | CX51040R07C | 4*10/100/1000M RJ45 interface, 1 PON interface, built-in FWDM, 1 RF interface, support WIFI 5G&2.4G, support CATV AGC, plastic casing, external power supply adapter |
