● 2GE+AC WIFI+POTS is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access.
● 2GE+AC WIFI+POTS is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
● 2GE+AC WIFI+POTS adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China telecommunication CTC3.0 and GPON Standard of ITU-TG.984.X
● 2GE+AC WIFI+POTS is designed by Realtek chipset 9607C.
> Supports GPON and EPON auto detection
> Support Rogue ONT detection > Support Route mode PPPOE/DHCP/Static IP and Bridge mixed mode > Support NAT, Firewall function. > Support Internet, IPTV and VoIP services automatically bound to ONT ports > Support Virtual server, DMZ, and DDNS, UPNP > Support Filtering based on MAC/IP/URL > Support SIP protocol for VoIP Service
| Technical Item | Details |
| PON interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface | 2 x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
| WIFI Interface | Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 4*4MIMO, 5dBi external antenna, rate up to 867Mbps Support: multiple SSID TX power: 11n--22dBm/11ac--24dBm |
| POTS Port | RJ11 Max 1km distance Balanced Ring, 50V RMS |
| LED | 8 LED, For Status of PWR、LOS、PON、LAN1、LAN2、2.4G、5.8G、FXS |
| Push-Button | 3 button for Function of Power on/off, Reset, WPS |
| Operating condition | Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition | Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply | DC 12V/1A |
| Power Consumption | <6W |
| Net Weight | <0.3kg |
> Support 802.11 b/g/n, 802.11ac WIFI(4x4 MIMO) function and Multiple SSID > Support Flow & Storm Control , Loop Detection and Port Forwarding > Support IPv4/IPv6 dual stack and DS-Lite > Support IGMP transparent/snooping/proxy > Support TR069 Remote Configuration and maintenance > Integrated OAM remote configuration and maintenance function > Compatible with popular OLT (HW, ZTE, FiberHome,VSOL...)Q1. What is the available network speed of XPON ONU with WIFI2.4? A: XPON ONU with WIFI2.4 supports a maximum network speed of 300Mbps and an average network speed of 160Mbps. Q2. What is the network speed of WIFI5.8 on XPON ONU? A: XPON ONU with WIFI5.8 provides the highest network speed of 1200Mbps. Q3. Can XPON ONU automatically switch the operating frequency (2.4GHz and 5.8GHz)? A: Yes, XPON ONU can automatically switch between 2.4GHz and 5.8GHz operating frequency. Q4. Can XPON ONU automatically switch between EPON and GPON modes? A: Yes, XPON ONU will automatically switch to EPON mode when connected to EPON OLT. Also, when connected to GPON OLT, it will automatically switch to GPON mode. Q5. What additional functions does XPON ONU support? A: XPON ONU supports various functions such as virtual server, DMZ, DDNS, UPnP, etc. This allows for enhanced network management and customization options.● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Service：Broadband Internet access, IPV, VOD, video surveillance
| Pilot Lamp | Status | Description |
| 2.4G | On | 2.4G WIFI up |
| Blink | 2.4G WIFI is sending or/and receiving data (ACT). | |
| Off | 2.4G WIFI down | |
| 5.8G | On | 5G WIFI up |
| Blink | 5G WIFI is sending or/and receiving data (ACT). | |
| Off | 5G WIFI down | |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
| FXS | On | Telephone has registered to the SIP Server. |
| Blink | Telephone has registered and data transmission (ACT). | |
| Off | Telephone registration is incorrect. |
Let's take a look at where I upgraded the firmware from my page!
Firmware upgrade: The operation allows upgrade the firmware to the new version. Click the “choose file” button to select the software and click the “Upgrade” button to update. Note: During the upgrade process, please don’t power off the device .Otherwise it will make the system broken.
| Product Name | Product Model | Descriptions |
| XPON 2GE AC WIFI POTS ONU | CX50120R07C | 2*10/100/1000M, 1 PON interface, RJ11 interface, support WIFI 5G&2.4G, plastic casing, external power supply adapter |
