Leading Factory for Custom XPON 1GE WiFi ONU Manufacturing

● 1GE ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.

● 1GE ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.

●1GE ONU adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunication EPON CTC3.0.

● 1GE ONU is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.

● 1GE ONU is designed by Realtek chipset 9601D

> Supports Dual Mode (can access GPON/EPON OLT).

> Supports SFU and HGU of EPON CTC 3.0 standard

> Supports GPON G.984/G.988 standards and IEEE802.3ah.

> Support NAT, Firewall function.

> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect

> Support port mode of vlan configuration

> Support LAN IP and DHCP Server configuration

Technical Item	Details
PON interface	1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm,Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface	10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector
LED	4 LED, For Status of POWER、LOS、PON、LAN
Push-Button	2, for Function of Power on/off, Reset
Operating condition	Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing）
Storing Condition	Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/1A
Power Consumption	<3W
Net Weight	<0.2kg

> Support TR069 Remote Configuration and maintenance > Support Route PPPOE/DHCP/Static IP and Bridge mixed mode > Support IPv4/IPv6 dual stack > Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy > Compatible with popular OLT(HW, ZTE, FiberHome,)

Pilot	Status	Description
POWER	On	The device is powered up.
POWER	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN	On	Port is connected properly (LINK).
	Blink	Port is sending or/and receiving data (ACT).
	Off	Port connection exception or not connected.

● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Service：Broadband Internet access, IPTV, VOD(video on demand), video surveillance, etc.Q1. Can XPON ONU support EPON and GPON modes at the same time? A: Yes, XPON ONU can automatically switch between EPON or GPON mode when connected to EPON OLT or GPON OLT. Q2. Does XPON ONU comply with China Telecom EPON CTC 3.0 standard? A: Yes, XPON ONU meets the SFU and HGU requirements of China Telecom EPON CTC 3.0 standard. Q3. What additional functions does XPON ONU support? A: XPON ONU supports a variety of functions, including XGSPON environment, OMCI control, OAM, multi-brand OLT management, TR069, TR369, TR098, NAT, firewall functions. Q4. What are the characteristics of XPON ONU? A: XPON ONU is famous for its high reliability, convenient management, flexible configuration and quality of service (QoS), suitable for new network environment applications and smart homes. Q5. Can XPON ONU be used in smart home environment? A: Yes, XPON ONU is suitable for smart home applications, providing functions such as quality of service (QoS) and support for smart home furniture.