Leading Manufacturer of XPON 1G3F Wi-Fi POTs ONUs

●1G3F+WIFI+POTs is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.

● 1G3F+WIFI+POTs is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● 1G3F+WIFI+POTs adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunications EPON CTC3.0 . ● 1G3F+WIFI+POTs is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps. ● 1G3F+WIFI+POTs is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. ● 1G3F+WIFI+POTs is designed by ZTE chip set 279127.

> Supports Dual Mode (can access GPON/EPON OLT).

> Supports GPON G.984/G.988 standards > Support SIP Protocol for VoIP Service > Integrated line testing compliant with GR-909 on POTs > Support 802.11n WIFI (2x2 MIMO) function > Support NAT, Firewall function. > Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect > Support port mode of VLAN configuration

Technical Item	Details
PON interface	1 E/GPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0.5~+4dBm Transmission distance: 20KM
LAN interface	1x10/100/1000Mbps and 3x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
WIFI Interface	Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM
POTS Port	RJ11 Max 1km distance Balanced Ring, 50V RMS
LED	10 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN4、 FXS
Push-Button	3, for Function of Power on/off, Reset, WPS
Operating condition	Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing）
Storing Condition	Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/1A
Power Consumption	<6W
Net Weight	<0.4kg

> Support LAN IP and DHCP Server configuration > Support TR069 Remote Configuration and WEB Management > Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode > Support IPv4/IPv6 dual stack > Support IGMP transparent/snooping/proxy > In compliant with IEEE802.3ah standard > Compatible with popular OLT(HW, ZTE, FiberHome...)

Product Name	Product Model	Descriptions
XPON 1G3F WIFI POTs ONU	ZX20140Z127	110/100/1000M and 310/100M Ethernet interface, 1 PON interface, 1 POTS interface, support Wi-Fi function, Plastic casing, external power supply adapter

● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)

● Typical Service：Broadband Internet access, IPTV, VoIP etc.

Pilot Lamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN4	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
FXS	On	Telephone has registered to the SIP Server.
	Blink	Telephone has registered and data transmission (ACT).
	Off	Telephone registration is incorrect.

(1) Network cable is damaged or loose connection. (2) Cable type errors. (3) Long lines outside the allowable range.Q1: What is the purpose of 1 Gigabit port, 3 100M ports and POTS in HGU (Home Gateway Unit)? A1: One gigabit port, three 100M ports and POTS in HGU are designed to provide access to carrier-grade FTTH application data services. These ports support different FTTH solutions and are essential for connecting various devices to the network. Q2: What is the maximum rate supported by XPON ONU? A2: XPON ONU follows the IEEE802.11n standard, adopts 2x2 MIMO technology, and the maximum rate can reach 300Mbps. This high-speed connection ensures efficient and seamless data transfer within the network. Q3: Does XPON ONU meet industry standards? A3: Yes, XPON ONU fully complies with technical specifications such as ITU-T G984.x and IEEE802.3ah. These standards ensure interoperability and compatibility with other network equipment, thereby guaranteeing a robust and reliable network infrastructure. Q4: What is the warranty period of the product? A4: Our products are guaranteed for 1-3 years from the date of sale. This warranty period ensures customer satisfaction and guarantees against any manufacturing defect or malfunction during normal use. Q5: Is the software of the product updated regularly? A5: Yes, our products regularly receive software updates to enhance performance, security and compatibility. These updates are critical to ensuring a smooth and reliable user experience, and we strive to provide our customers with the latest software advancements.