XPON 1G3F WIFI ONU Manufacturers: Leading Wholesaler & Factory

● 1G3F+WIFI is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.

● 1G3F+WIFI is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.

● 1G3F+WIFI adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunications EPON CTC3.0.

● 1G3F+WIFI is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps.

● XPON 1G3F+WIFI are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.

● XPON 1G3F+WIFI is designed by ZTE chip set 279127

> Supports Dual Mode (can access GPON/EPON OLT).

> Supports GPON G.984/G.988 standards > Support 802.11n WIFI (2x2 MIMO) function > Support NAT, Firewall function. > Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect > Support port mode of VLAN configuration > Support LAN IP and DHCP Server configuration

Technical Item	Details
PON interface	1 E/GPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/UPC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0.5~+4dBm Transmission distance: 20KM
LAN interface	1x10/100/1000Mbps and 3x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
WIFI Interface	Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM
LED	9 LED, For Status of POWER, LOS, PON, LAN1~LAN4, WIFI, WPS
Push-Button	3, for Function of Power on/off, Reset, WPS
Operating condition	Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing）
Storing Condition	Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/1A
Power Consumption	<6W
Net Weight	<0.4kg

> Support TR069 Remote Configuration and WEB Management > Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode > Support IPv4/IPv6 dual stack > Support IGMP transparent/snooping/proxy > In compliant with IEEE802.3ah standard > Compatible with popular OLT (HW, ZTE, FiberHome...)

Product Name	Product Model	Descriptions
XPON 1G3F WIFI ONU	ZX20040Z127	10/100/1000Mbps auto adaptive Ethernet（RJ45）,1 PON interface, Plastic Casing, External power supply adapter

● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Service：Broadband Internet access, IPTV etc.

Pilot Lamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN4	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.

(1) the optical cable is broken (2) the optical line error.Q1. What are the different types of ports supported by the device? A: The device supports 1 Gigabit port and 3 100M ports. Q2. How many SSIDs can be created with this device? A: This device supports creating multiple SSIDs. Q3. What is the use of SSID technology in WLAN? A: SSID technology divides the WLAN into multiple subnets, and each subnet requires different authentication. This can enhance security and access control within the network. Q4. What is the maximum speed of a 2.4GHz network on this device? A: The 2.4GHz network on the device can reach speeds up to 300Mbps. Q5. What data service access does this device support? A: The device supports FTTH (fiber-to-the-home) application data service access. Q6. What technology does the device use for EPON/GPON switching? A: The device is based on the mature, stable and cost-effective XPON technology. When connected with EPON OLT or GPON OLT, it can automatically switch to EPON or GPON mode. Q7. Does the device comply with any specific technical standards? A: Yes, the device is fully compliant with IEEE802.11n standards and technical specifications such as ITU-T G984.X and IEEE.