● 4G+WIFI+2CATV+1POTS+2USB is a broadband access device specially designed to meet the needs of fixed network operators for FTTH and triple play services.
● 4G+WIFI+2CATV+1POTS+2USBis based on a high-performance chip solution, supports XPON dual-mode technology (EPON and GPON), provides carrier-grade FTTH application data services, and supports OAM/OMCI management.
● 4G+WIFI+2CATV+1POTS+2USB supports layer 2/layer 3 functions such as IEEE802.11b/g/n/ac/ax WiFi 6 technology, using 4x4 MIMO, with a maximum rate of up to 1800Mbps.
● 4G+WIFI+2CATV+1POTS+2USB are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
● 4G+WIFI+2CATV+1POTS+2USB are designed by Realtek chipset 9607C.
> Supports Dual Mode (can access GPON/EPON OLT).
> Comply with GPON G.984/G.988 standard and IEEE802.3ah.
> Support CATV interface for Video Service and remote control by Major OLT
> Support SIP Protocol for VoIP Service
> Integrated line testing compliant with GR-909 on POTS
> Support 802.11 b/g/a/n/ac/ax, 802.11ax WIFI6(4x4MIMO) function and Multiple SSID
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support power-off alarm function ,easy for link problem detection
| Technical Item | Details |
| PON interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm single mode，SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Overload optical power: -3dBm(EPON) or - 8dBm(GPON) Transmission distance: 20KM |
| LAN interface | 4 x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
| USB Interface | Stamdard USB2.0、Stamdard USB3.0 |
| WIFI Interface | Compliant with IEEE802.11b/g/n/ac/ax 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz Support 4*4MIMO, 5dBi external antenna, rate up to 1800Gbps Support: multiple SSID TX power: 11n--22dBm/11ac--24dBm |
| CATV Interface | 2xRF, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 80dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| POTS Port | 1×POTS RJ11 Connector |
| LED | 16 LED,：PWR、LOS\PON、INTERNET、LAN1、LAN2、LAN3、LAN4、2.4G,、5G、WPS、USB2.0/USB3.0、 FXS、Normal 1 (CATV1)/Normal 2(CATV2) |
| Push-Button | 3, for Function of Power on/off, Reset, WPS |
| Operating condition | Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition | Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply | DC 12V/1.5A |
| Power Consumption | <18W |
| Net Weight | <0.4kg |
> Support port mode of VLAN configuration
> Support LAN IP and DHCP Server configuration
> Support TR069 Remote Configuration and WEB Management
> Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
> Support IPv4/IPv6 dual stack
> Support IGMP transparent/snooping/proxy
> Support ACL and SNMP to configure data packet filter flexibly
> Compatible with popular OLT(HW, ZTE, FiberHome,VSOL...)
| Product Name | Product Model | Descriptions |
| AX1800 WIFI6 4GE+WIFI+2CATV+POTs+2USB ONU | CX62142R07C | 4*10/100/1000MNetwork port ;2 CATA ports；1 POTS ports；2 USB ports；external power supply adapter |
| Pilot Lamp | Status | Description |
| WIFI | On | The WIFI interface is up. |
| Blink | The WIFI interface is sending or/and receiving data (ACT). | |
| Off | The WIFI interface is down. | |
| WPS | Blink | The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN1~LAN4 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
| FXS | On | Telephone has registered to the SIP Server. |
| Blink | Telephone has registered and data transmission (ACT). | |
| Off | Telephone registration is incorrect. | |
| Normal (CATV) | On | Input optical power is between -15dBm and 2dBm |
| Off | Input optical power is higher than 2dBm or lower than -15dBm |
| ONU Model | CX62242R07C | CX61242R07C | CX62142R07C | CX61142R07C |
| Feature | 4GE 2CATV 2VOIP 2.4/5G WIFI 2USB | 4GE 1CATV 2VOIP 2.4/5G WIFI 2USB | 4GE 2CATV 1VOIP 2.4/5G WIFI 2USB | 4GE 1CATV 1VOIP 2.4/5G WIFI 2USB |
| ONU Model | CX62042R07C | CX61042R07C | CX60242R07C | CX60142R07C |
| Feature | 4GE 2CATV 2.4/5G WIFI 2USB | 4GE 1CATV 2.4/5G WIFI 2USB | 4GE 2VOIP 2.4/5G WIFI 2USB | 4GE 1VOIP 2.4/5G WIFI 2USB |
| ONU Model | CX60042R07C | |||
| Feature | 4GE 2.4/5G WIFI 2USB |
